ACS Product Catalog
The ACS Scientific MCB-4B Catalog Page
The ACS Scientific Product Catalog
Advanced Control Systems Corporation designs, manufactures and supports a wide variety of application specific and general purpose motion control systems. In this catalog you should find exactly what you need.
Science In Motion
Here For Support
Call us at any time to speak with a real live engineer, or contact us by e-mail for product information, quotations and/or product support. 781-562-0475 email@example.com
Stepping Motor Intelligent Motion Driver/Controller
The MCB-4B Stepping Motor Intelligent Motion Driver/Controller is an open frame 4- axis integrated stepping motor driver/controller that drives and controls any 2-phase stepping motors with phase currents from 0.25 to 3.0Amps/phase, simultaneously. The MCB-4B performs indexing functions without the need of a host computer, but can operate under the control of a host. The MCB-4B's internal nonvolatile memory will store and execute a programmed instruction set, with four on-board toggle switches providing manual jog control. High efficiency , low noise motor drivers provide programmable full, half, quarter and one eighth step per full motor step, with torque compensation.
Find full driver support for the MCB-4B Driver/Controller in Certified Scientific Software's spec X-Ray Diffraction and Data Acquisition software
Find full I/O device support for the MCB-4B Driver/Controller in EPICS Experimental Physics and Industrial Control System Software
MCB-4B Product Accessories
Single Board Chassis for the MCB-4B
The MCE-1 Chassis provides a protective enclosure for the MCB-4B with external serial and motor terminal block connections
Motor and Logic Power Supply
The PSU-404 provides 40VDC/4Amp motor and 5VDC/1Amp logic power for the MCB-4B from 120VAC and 240VAC source.
Home/Limits Interface Board
The MCE-4I provides an interface to Home and Limit switches with LED indicators.
Multi-Board Rack Chassis for the MCB-4B
The MCE-1 Chassis is a 19" rack mount enclosure for up to 8 (eight) MCB-4B controller boards, providing 32 axis of motor control from a single rack.
The CIB-232 Communications Interface Module plugs into the MCA-9 rack to network a series of MCB-4B boards via RS-232 or RS-485 serial communications.
The CIB-488Communications Interface Module plugs into the MCA-9 rack to network a series of MCB-4B boards via IEEE-488 (GPIB) serial communications.